PDA

View Full Version : chlorine, chloramine or both?


biotopeguy
May 14th, 2009, 04:05 PM
Does any one know if Brooklyn water suppliers use chloramine only or both chloramine and chlorine to treat our water supplies?

bderen
May 14th, 2009, 04:19 PM
here is a statement from DEP, I don't see chloramine mentioned anywhere.

All surface water and groundwater entering New York
City’s distribution system is treated with chlorine, fluoride,
food grade phosphoric acid and, in some cases, sodium
hydroxide. New York City uses chlorine to meet the New
York State Sanitary Code and federal Safe Drinking Water
Act (SDWA) disinfection requirements. Fluoride, at a
concentration of one part per million, is added to help
prevent tooth decay and has been added since 1966 in
accordance with the New York City Health Code. Phosphoric
acid is added to create a protective film on pipes that
reduces the release of metals such as lead from household
plumbing. Sodium hydroxide is added to Catskill/Delaware
water to raise the pH and reduce corrosivity.


and here are full reports

http://www.nyc.gov/html/dep/html/drinking_water/wsstate.shtml


Any more info can be obtained by calling DEP directly.

biotopeguy
May 16th, 2009, 05:10 PM
Thanks Bderen!

Now I know I can just age my water to get rid of chlorine instead of spending money on a dechlorinator.

stevem
May 17th, 2009, 12:50 PM
Even though chlorine does disapates, it is still good practice to aerate your water, a small air stone or power head will do fine. Stagent water is very low in oxeqen.

bderen
May 18th, 2009, 10:32 AM
Thanks Bderen!

Now I know I can just age my water to get rid of chlorine instead of spending money on a dechlorinator.

You can certainly do that. I've done some tests trying to measure afficiency of Stress coat and found that it's plenty enough to add a drop for every 2 gallons. Chloring/Chloramine strips showed 0 after about 5-10 seconds of stirring the water.