Brooklyn Aquarium Society - Public Forum

Brooklyn Aquarium Society - Public Forum (http://forum.brooklynaquariumsociety.org/index.php)
-   Equipment (http://forum.brooklynaquariumsociety.org/forumdisplay.php?f=19)
-   -   Catfish Stuck In Sponge Filter Exhaust Tubes (http://forum.brooklynaquariumsociety.org/showthread.php?t=290)

rdebonis July 22nd, 2009 04:42 PM

Catfish Stuck In Sponge Filter Exhaust Tubes
 
I use Hydro-Sponge filters in many of my tanks. I am having a problem particularly with C. Paleatus catfish getting stuck in the long plastic Exhaust tubes on these filters. C. Paleatus is a very active cool water Cory. It remains very active both day and night in all layers of the water column and occasionally, I find them stuck head down in the Hydro-Sponge exhaust tubes. The only thing that saves them from drowning is that they are facing head down into the water flow and the water is being forced into their gills, forcing oxygen into them. If they were facing the other way they would definitely drown. I have had some catfish stuck like this for a number of days before I discovered them and released them. I have been lucky and never lost a Catfish that was stuck like this, but I'm afraid eventually it will happen. All Cory's like tight spaces, but Paleatus because they spend so much time in all layers of the water column, including the top layer are particularly susceptible to entering and getting stuck in these exhaust tubes. I have to keep C. paleatus because the tanks I have them in are unheated with other cool water fish and the temperature will often drop to 55 to 60 degrees in the Winter. In their native habitat in South America, they are found in water that is cool. They tolerate warmer water, but prefer cooler water and are much more active and healthy in it. I also like them because of their unique color pattern and constant activity, I find them one of the most interesting members of the Corydorus family to watch.

Other than removing these Exhaust Tubes, which I'm afraid will affect the operation of the filter, does anyone know how I can prevent these fish from going down the tubes? I thought of jury rigging netting over the top of the exhaust tube with a hole for the air tube to go through, but then I have to secure it with rubber bands or cord.

xoomer July 23rd, 2009 11:56 AM

I'd say install some sort of coarse net over the exhaust. It won't be the prittiest solution but will definitely work. How thick is the tube?

rdebonis July 29th, 2009 05:25 PM

The tube is 2.5 cm in diameter and the wall of the tube is 1 mm thick.

xoomer July 29th, 2009 05:31 PM

Maybe you can fabricate something out of a piece of egg crate.

rdebonis July 29th, 2009 07:55 PM

Good idea, I'll try it. Thx

uncenue09 December 14th, 2009 09:33 AM

Catfish Stuck In Sponge Filter Exhaust Tubes
 
If you are not getting bubbles to flow thru the lift tube, try a bigger air pump or a new one. You need the base on the sponge filter this is what keeps it weighted down, otherwise it will float to the top.

rdebonis December 15th, 2009 07:23 PM

Quote:

Originally Posted by uncenue09 (Post 1185)
If you are not getting bubbles to flow thru the lift tube, try a bigger air pump or a new one. You need the base on the sponge filter this is what keeps it weighted down, otherwise it will float to the top.

Thanks for your suggestions but unfortunately they have nothing to do with the problem. :(

If you read my original message, the problem is not airflow thru the lift tube or the weighted base, which is obviously required to weight down the sponge filter. The problem was Paleatus catfish swimming down the tube against the airflow and getting stuck in the tube. I have since removed the tubes which has not affected the filtration and has solved the problem.

stevem February 11th, 2010 10:16 PM

i also removed the tube and do not see any change


All times are GMT -4. The time now is 02:21 PM.

Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.

Page generated in 0.03110 seconds with 10 queries